FASTENING OPTIONS
![1top_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc 1top_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc](https://dos.1trest.com/wp-content/uploads/2020/10/1top_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc.jpg)
![2mid_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc 2mid_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc](https://dos.1trest.com/wp-content/uploads/2020/10/2mid_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc.jpg)
![3bottom_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc 3bottom_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc](https://dos.1trest.com/wp-content/uploads/2020/10/3bottom_option-ohe6a2ojfvzpic5b40ajeamf0xhdgjoj5tcvng0ktc.jpg)
MILLING
The milled composite panel could bebent, by creating thus external and
internal angles. The inner angle of
the milled groove could be 900 up to
1350. The size of the angle enables to
bend the detail under the straight as
well as sharp angle
![Acrobat_4SON5e Acrobat_4SON5e](https://dos.1trest.com/wp-content/uploads/2020/10/Acrobat_4SON5e-800x300.png)
The groove geometry should have a strictly specified form. The deviation from the form could take to the decrease of useful life, worsening of appearance and change in the final detail of geometric forms.